#include <DevicePath.h>
Collaboration diagram for SATA_DEVICE_PATH:
Public Attributes | |
| EFI_DEVICE_PATH_PROTOCOL | Header |
| UINT16 | HBAPortNumber |
| UINT16 | PortMultiplierPortNumber |
| UINT16 | Lun |
Member Data Documentation
◆ HBAPortNumber
| UINT16 SATA_DEVICE_PATH::HBAPortNumber |
The HBA port number that facilitates the connection to the device or a port multiplier. The value 0xFFFF is reserved.
◆ Header
| EFI_DEVICE_PATH_PROTOCOL SATA_DEVICE_PATH::Header |
◆ Lun
| UINT16 SATA_DEVICE_PATH::Lun |
Logical Unit Number.
◆ PortMultiplierPortNumber
| UINT16 SATA_DEVICE_PATH::PortMultiplierPortNumber |
The Port multiplier port number that facilitates the connection to the device. Must be set to 0xFFFF if the device is directly connected to the HBA.
The documentation for this struct was generated from the following file:
- XenevaOS/Boot/include/Protocol/DevicePath.h
