tty_flags.h File Reference

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros
#define	ASYNCB_HUP_NOTIFY
#define	ASYNCB_FOURPORT   1 /* Set OUT1, OUT2 per AST Fourport settings */
#define	ASYNCB_SAK   2 /* Secure Attention Key (Orange book) */
#define	ASYNCB_SPLIT_TERMIOS   3 /* [x] Separate termios for dialin/callout */
#define	ASYNCB_SPD_HI   4 /* Use 57600 instead of 38400 bps */
#define	ASYNCB_SPD_VHI   5 /* Use 115200 instead of 38400 bps */
#define	ASYNCB_SKIP_TEST   6 /* Skip UART test during autoconfiguration */
#define	ASYNCB_AUTO_IRQ
#define	ASYNCB_SESSION_LOCKOUT   8 /* [x] Lock out cua opens based on session */
#define	ASYNCB_PGRP_LOCKOUT   9 /* [x] Lock out cua opens based on pgrp */
#define	ASYNCB_CALLOUT_NOHUP   10 /* [x] Don't do hangups for cua device */
#define	ASYNCB_HARDPPS_CD   11 /* Call hardpps when CD goes high */
#define	ASYNCB_SPD_SHI   12 /* Use 230400 instead of 38400 bps */
#define	ASYNCB_LOW_LATENCY   13 /* Request low latency behaviour */
#define	ASYNCB_BUGGY_UART
#define	ASYNCB_AUTOPROBE   15 /* [x] Port was autoprobed by PCI/PNP code */
#define	ASYNCB_MAGIC_MULTIPLIER   16 /* Use special CLK or divisor */
#define	ASYNCB_LAST_USER   16
#define	ASYNCB_INITIALIZED   31 /* Serial port was initialized */
#define	ASYNCB_SUSPENDED   30 /* Serial port is suspended */
#define	ASYNCB_NORMAL_ACTIVE   29 /* Normal device is active */
#define	ASYNCB_BOOT_AUTOCONF   28 /* Autoconfigure port on bootup */
#define	ASYNCB_CLOSING   27 /* Serial port is closing */
#define	ASYNCB_CTS_FLOW   26 /* Do CTS flow control */
#define	ASYNCB_CHECK_CD   25 /* i.e., CLOCAL */
#define	ASYNCB_SHARE_IRQ   24 /* for multifunction cards, no longer used */
#define	ASYNCB_CONS_FLOW   23 /* flow control for console */
#define	ASYNCB_FIRST_KERNEL   22
#define	ASYNC_HUP_NOTIFY   (1U << ASYNCB_HUP_NOTIFY)
#define	ASYNC_SUSPENDED   (1U << ASYNCB_SUSPENDED)
#define	ASYNC_FOURPORT   (1U << ASYNCB_FOURPORT)
#define	ASYNC_SAK   (1U << ASYNCB_SAK)
#define	ASYNC_SPLIT_TERMIOS   (1U << ASYNCB_SPLIT_TERMIOS)
#define	ASYNC_SPD_HI   (1U << ASYNCB_SPD_HI)
#define	ASYNC_SPD_VHI   (1U << ASYNCB_SPD_VHI)
#define	ASYNC_SKIP_TEST   (1U << ASYNCB_SKIP_TEST)
#define	ASYNC_AUTO_IRQ   (1U << ASYNCB_AUTO_IRQ)
#define	ASYNC_SESSION_LOCKOUT   (1U << ASYNCB_SESSION_LOCKOUT)
#define	ASYNC_PGRP_LOCKOUT   (1U << ASYNCB_PGRP_LOCKOUT)
#define	ASYNC_CALLOUT_NOHUP   (1U << ASYNCB_CALLOUT_NOHUP)
#define	ASYNC_HARDPPS_CD   (1U << ASYNCB_HARDPPS_CD)
#define	ASYNC_SPD_SHI   (1U << ASYNCB_SPD_SHI)
#define	ASYNC_LOW_LATENCY   (1U << ASYNCB_LOW_LATENCY)
#define	ASYNC_BUGGY_UART   (1U << ASYNCB_BUGGY_UART)
#define	ASYNC_AUTOPROBE   (1U << ASYNCB_AUTOPROBE)
#define	ASYNC_MAGIC_MULTIPLIER   (1U << ASYNCB_MAGIC_MULTIPLIER)
#define	ASYNC_FLAGS   ((1U << (ASYNCB_LAST_USER + 1)) - 1)
#define	ASYNC_DEPRECATED
#define	ASYNC_USR_MASK
#define	ASYNC_SPD_CUST   (ASYNC_SPD_HI|ASYNC_SPD_VHI)
#define	ASYNC_SPD_WARP   (ASYNC_SPD_HI|ASYNC_SPD_SHI)
#define	ASYNC_SPD_MASK   (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
#define	ASYNC_INITIALIZED   (1U << ASYNCB_INITIALIZED)
#define	ASYNC_NORMAL_ACTIVE   (1U << ASYNCB_NORMAL_ACTIVE)
#define	ASYNC_BOOT_AUTOCONF   (1U << ASYNCB_BOOT_AUTOCONF)
#define	ASYNC_CLOSING   (1U << ASYNCB_CLOSING)
#define	ASYNC_CTS_FLOW   (1U << ASYNCB_CTS_FLOW)
#define	ASYNC_CHECK_CD   (1U << ASYNCB_CHECK_CD)
#define	ASYNC_SHARE_IRQ   (1U << ASYNCB_SHARE_IRQ)
#define	ASYNC_CONS_FLOW   (1U << ASYNCB_CONS_FLOW)
#define	ASYNC_INTERNAL_FLAGS   (~((1U << ASYNCB_FIRST_KERNEL) - 1))

Macro Definition Documentation

ASYNC_AUTO_IRQ

#define ASYNC_AUTO_IRQ   (1U << ASYNCB_AUTO_IRQ)

ASYNC_AUTOPROBE

#define ASYNC_AUTOPROBE   (1U << ASYNCB_AUTOPROBE)

ASYNC_BOOT_AUTOCONF

#define ASYNC_BOOT_AUTOCONF   (1U << ASYNCB_BOOT_AUTOCONF)

ASYNC_BUGGY_UART

#define ASYNC_BUGGY_UART   (1U << ASYNCB_BUGGY_UART)

ASYNC_CALLOUT_NOHUP

#define ASYNC_CALLOUT_NOHUP   (1U << ASYNCB_CALLOUT_NOHUP)

ASYNC_CHECK_CD

#define ASYNC_CHECK_CD   (1U << ASYNCB_CHECK_CD)

ASYNC_CLOSING

#define ASYNC_CLOSING   (1U << ASYNCB_CLOSING)

ASYNC_CONS_FLOW

#define ASYNC_CONS_FLOW   (1U << ASYNCB_CONS_FLOW)

ASYNC_CTS_FLOW

#define ASYNC_CTS_FLOW   (1U << ASYNCB_CTS_FLOW)

ASYNC_DEPRECATED

#define ASYNC_DEPRECATED

Value:

        (ASYNC_SPLIT_TERMIOS | ASYNC_SESSION_LOCKOUT | \
        ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE)

ASYNC_FLAGS

#define ASYNC_FLAGS   ((1U << (ASYNCB_LAST_USER + 1)) - 1)

ASYNC_FOURPORT

#define ASYNC_FOURPORT   (1U << ASYNCB_FOURPORT)

ASYNC_HARDPPS_CD

#define ASYNC_HARDPPS_CD   (1U << ASYNCB_HARDPPS_CD)

ASYNC_HUP_NOTIFY

#define ASYNC_HUP_NOTIFY   (1U << ASYNCB_HUP_NOTIFY)

ASYNC_INITIALIZED

#define ASYNC_INITIALIZED   (1U << ASYNCB_INITIALIZED)

ASYNC_INTERNAL_FLAGS

#define ASYNC_INTERNAL_FLAGS   (~((1U << ASYNCB_FIRST_KERNEL) - 1))

ASYNC_LOW_LATENCY

#define ASYNC_LOW_LATENCY   (1U << ASYNCB_LOW_LATENCY)

ASYNC_MAGIC_MULTIPLIER

#define ASYNC_MAGIC_MULTIPLIER   (1U << ASYNCB_MAGIC_MULTIPLIER)

ASYNC_NORMAL_ACTIVE

#define ASYNC_NORMAL_ACTIVE   (1U << ASYNCB_NORMAL_ACTIVE)

ASYNC_PGRP_LOCKOUT

#define ASYNC_PGRP_LOCKOUT   (1U << ASYNCB_PGRP_LOCKOUT)

ASYNC_SAK

#define ASYNC_SAK   (1U << ASYNCB_SAK)

ASYNC_SESSION_LOCKOUT

#define ASYNC_SESSION_LOCKOUT   (1U << ASYNCB_SESSION_LOCKOUT)

ASYNC_SHARE_IRQ

#define ASYNC_SHARE_IRQ   (1U << ASYNCB_SHARE_IRQ)

ASYNC_SKIP_TEST

#define ASYNC_SKIP_TEST   (1U << ASYNCB_SKIP_TEST)

ASYNC_SPD_CUST

#define ASYNC_SPD_CUST   (ASYNC_SPD_HI|ASYNC_SPD_VHI)

ASYNC_SPD_HI

#define ASYNC_SPD_HI   (1U << ASYNCB_SPD_HI)

ASYNC_SPD_MASK

#define ASYNC_SPD_MASK   (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)

ASYNC_SPD_SHI

#define ASYNC_SPD_SHI   (1U << ASYNCB_SPD_SHI)

ASYNC_SPD_VHI

#define ASYNC_SPD_VHI   (1U << ASYNCB_SPD_VHI)

ASYNC_SPD_WARP

#define ASYNC_SPD_WARP   (ASYNC_SPD_HI|ASYNC_SPD_SHI)

ASYNC_SPLIT_TERMIOS

#define ASYNC_SPLIT_TERMIOS   (1U << ASYNCB_SPLIT_TERMIOS)

ASYNC_SUSPENDED

#define ASYNC_SUSPENDED   (1U << ASYNCB_SUSPENDED)

ASYNC_USR_MASK

#define ASYNC_USR_MASK

Value:

        (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
        ASYNC_LOW_LATENCY)

ASYNCB_AUTO_IRQ

#define ASYNCB_AUTO_IRQ

Value:

                    7 /* Do automatic IRQ during
                    * autoconfiguration */

ASYNCB_AUTOPROBE

#define ASYNCB_AUTOPROBE   15 /* [x] Port was autoprobed by PCI/PNP code */

ASYNCB_BOOT_AUTOCONF

#define ASYNCB_BOOT_AUTOCONF   28 /* Autoconfigure port on bootup */

ASYNCB_BUGGY_UART

#define ASYNCB_BUGGY_UART

Value:

                    14 /* This is a buggy UART, skip some safety
                    * checks.  Note: can be dangerous! */

ASYNCB_CALLOUT_NOHUP

#define ASYNCB_CALLOUT_NOHUP   10 /* [x] Don't do hangups for cua device */

ASYNCB_CHECK_CD

#define ASYNCB_CHECK_CD   25 /* i.e., CLOCAL */

ASYNCB_CLOSING

#define ASYNCB_CLOSING   27 /* Serial port is closing */

ASYNCB_CONS_FLOW

#define ASYNCB_CONS_FLOW   23 /* flow control for console */

ASYNCB_CTS_FLOW

#define ASYNCB_CTS_FLOW   26 /* Do CTS flow control */

ASYNCB_FIRST_KERNEL

#define ASYNCB_FIRST_KERNEL   22

ASYNCB_FOURPORT

#define ASYNCB_FOURPORT   1 /* Set OUT1, OUT2 per AST Fourport settings */

ASYNCB_HARDPPS_CD

#define ASYNCB_HARDPPS_CD   11 /* Call hardpps when CD goes high */

ASYNCB_HUP_NOTIFY

#define ASYNCB_HUP_NOTIFY

Value:

                    0 /* Notify getty on hangups and closes
                    * on the callout port */

ASYNCB_INITIALIZED

#define ASYNCB_INITIALIZED   31 /* Serial port was initialized */

ASYNCB_LAST_USER

#define ASYNCB_LAST_USER   16

ASYNCB_LOW_LATENCY

#define ASYNCB_LOW_LATENCY   13 /* Request low latency behaviour */

ASYNCB_MAGIC_MULTIPLIER

#define ASYNCB_MAGIC_MULTIPLIER   16 /* Use special CLK or divisor */

ASYNCB_NORMAL_ACTIVE

#define ASYNCB_NORMAL_ACTIVE   29 /* Normal device is active */

ASYNCB_PGRP_LOCKOUT

#define ASYNCB_PGRP_LOCKOUT   9 /* [x] Lock out cua opens based on pgrp */

ASYNCB_SAK

#define ASYNCB_SAK   2 /* Secure Attention Key (Orange book) */

ASYNCB_SESSION_LOCKOUT

#define ASYNCB_SESSION_LOCKOUT   8 /* [x] Lock out cua opens based on session */

ASYNCB_SHARE_IRQ

#define ASYNCB_SHARE_IRQ   24 /* for multifunction cards, no longer used */

ASYNCB_SKIP_TEST

#define ASYNCB_SKIP_TEST   6 /* Skip UART test during autoconfiguration */

ASYNCB_SPD_HI

#define ASYNCB_SPD_HI   4 /* Use 57600 instead of 38400 bps */

ASYNCB_SPD_SHI

#define ASYNCB_SPD_SHI   12 /* Use 230400 instead of 38400 bps */

ASYNCB_SPD_VHI

#define ASYNCB_SPD_VHI   5 /* Use 115200 instead of 38400 bps */

ASYNCB_SPLIT_TERMIOS

#define ASYNCB_SPLIT_TERMIOS   3 /* [x] Separate termios for dialin/callout */

ASYNCB_SUSPENDED

#define ASYNCB_SUSPENDED   30 /* Serial port is suspended */